Vishay Siliconix
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
IRFP440PBF
विस्तार से देखें DataSheets

IRFP440PBF

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies and motor control
Characteristics: High voltage, high-speed switching, low on-resistance
Package: TO-247AC
Essence: Power MOSFET for high-power switching applications
Packaging/Quantity: Available in reels of 50 or 100 units

Specifications

  • Drain-Source Voltage (VDSS): 500V
  • Continuous Drain Current (ID): 9.7A
  • On-Resistance (RDS(on)): 0.44Ω
  • Gate-Source Voltage (VGS): ±20V
  • Power Dissipation (PD): 280W

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low on-resistance
  • Good thermal performance

Advantages and Disadvantages

Advantages: - Suitable for high-power applications - Low conduction losses - Fast switching times

Disadvantages: - Gate capacitance may require careful driver design - Sensitivity to over-voltage conditions

Working Principles

The IRFP440PBF operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the device switches on, allowing current to flow through it.

Detailed Application Field Plans

The IRFP440PBF is commonly used in: - Switch-mode power supplies - Motor control circuits - Inverters and converters for renewable energy systems - High-power lighting systems

Detailed and Complete Alternative Models

  1. IRFP460PBF: Similar characteristics with higher voltage rating
  2. IRFP450PBF: Lower on-resistance for reduced conduction losses
  3. IRFP4332PBF: Enhanced thermal performance for high-power applications

In conclusion, the IRFP440PBF is a high-voltage power MOSFET suitable for various switching applications in power electronics. Its high-speed switching and low on-resistance make it an ideal choice for high-power systems such as power supplies and motor control circuits.

[Word Count: 314]

तकनीकी समाधानों में IRFP440PBF के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is the maximum drain-source voltage of IRFP440PBF?

    • The maximum drain-source voltage of IRFP440PBF is 500 volts.

  2. What is the continuous drain current rating of IRFP440PBF?

    • The continuous drain current rating of IRFP440PBF is 9.7 amperes.

  3. What is the on-state resistance (RDS(on)) of IRFP440PBF?

    • The on-state resistance (RDS(on)) of IRFP440PBF is typically 0.44 ohms at VGS = 10V.

  4. What is the gate-source voltage (VGS) for IRFP440PBF?

    • The gate-source voltage (VGS) for IRFP440PBF is ±20 volts.

  5. What is the power dissipation of IRFP440PBF?

    • The power dissipation of IRFP440PBF is 280 watts.

  6. What are the typical applications for IRFP440PBF?

    • IRFP440PBF is commonly used in high-power switching applications, motor control, and power supplies.

  7. What is the operating temperature range of IRFP440PBF?

    • The operating temperature range of IRFP440PBF is -55°C to 175°C.

  8. Is IRFP440PBF suitable for use in automotive applications?

    • Yes, IRFP440PBF is suitable for use in automotive applications.

  9. Does IRFP440PBF require a heat sink for proper operation?

    • Yes, IRFP440PBF typically requires a heat sink for proper thermal management.

  10. What are the recommended mounting techniques for IRFP440PBF?

    • IRFP440PBF can be mounted using through-hole or surface-mount techniques, following the manufacturer's guidelines for proper handling and soldering.