छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
SN74LVT240ADBR
Product Overview
- Category: Integrated Circuit (IC)
- Use: Logic Level Translator
- Characteristics: Low Voltage, Bi-directional, Octal Bus Transceiver
- Package: SSOP (Shrink Small Outline Package)
- Essence: Translates signals between different voltage levels in electronic circuits
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage Range: 1.65V to 3.6V
- High-Level Input Voltage: 2.0V to VCC + 0.5V
- Low-Level Input Voltage: -0.5V to 0.8V
- High-Level Output Voltage: VCC - 0.4V
- Low-Level Output Voltage: 0.4V
- Maximum Operating Frequency: 200MHz
- Number of Pins: 20
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The SN74LVT240ADBR has a total of 20 pins. The pin configuration is as follows:
- OE (Output Enable) 1
- A1 (Input/Output) 1
- I/O1 (Bi-directional Data I/O) 1
- GND (Ground)
- I/O2 (Bi-directional Data I/O) 2
- A2 (Input/Output) 2
- OE (Output Enable) 2
- VCC (Supply Voltage)
- I/O3 (Bi-directional Data I/O) 3
- A3 (Input/Output) 3
- I/O4 (Bi-directional Data I/O) 4
- GND (Ground)
- I/O5 (Bi-directional Data I/O) 5
- A4 (Input/Output) 4
- OE (Output Enable) 3
- VCC (Supply Voltage)
- I/O6 (Bi-directional Data I/O) 6
- A5 (Input/Output) 5
- I/O7 (Bi-directional Data I/O) 7
- I/O8 (Bi-directional Data I/O) 8
Functional Features
- Bi-directional voltage level translation between two different voltage domains.
- Allows interfacing between devices operating at different voltage levels.
- Provides bidirectional communication between systems with different voltage requirements.
- Supports high-speed data transmission up to 200MHz.
Advantages and Disadvantages
Advantages
- Wide supply voltage range allows compatibility with various systems.
- Bi-directional functionality simplifies circuit design and reduces component count.
- High-speed operation enables efficient data transfer.
- Small package size saves board space.
Disadvantages
- Limited number of channels (8) may not be sufficient for complex systems requiring more connections.
- Not suitable for applications requiring voltage translation beyond the specified voltage range.
Working Principles
The SN74LVT240ADBR is a logic level translator that uses a combination of MOSFETs and CMOS technology to achieve bi-directional voltage translation. It operates by monitoring the input voltage levels and translating them to the corresponding output voltage levels based on the supply voltage. The OE pins control the direction of data flow, enabling or disabling the translation process.
Detailed Application Field Plans
The SN74LVT240ADBR is commonly used in various electronic systems where voltage level translation is required. Some typical application fields include:
- Microcontroller interfacing with peripherals operating at different voltage levels.
- Communication interfaces between different logic families (e.g., TTL to CMOS).
- Level shifting in battery-powered devices with low voltage requirements.
- Signal translation between different integrated circuits within a system.
Detailed and Complete Alternative Models
- SN74LVC240ADBR: Similar to SN74LVT240ADBR, but operates at a lower voltage range (1.65V to 3.3V).
- SN74LVTH240ADBR: Offers higher speed operation (up to 400MHz) compared to SN74LVT240ADBR.
- SN74AVC4T245PW: Four-channel voltage level translator with enhanced ESD protection features.
These alternative models provide similar functionality to the SN74LVT240ADBR but may have different specifications or additional features depending on the specific application requirements.
Word count: 443 words
तकनीकी समाधानों में SN74LVT240ADBR के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं
Sure! Here are 10 common questions and answers related to the application of SN74LVT240ADBR:
Q: What is SN74LVT240ADBR?
A: SN74LVT240ADBR is a specific type of integrated circuit (IC) known as a buffer/line driver. It is commonly used for signal buffering and level shifting in digital circuits.
Q: What is the voltage supply range for SN74LVT240ADBR?
A: The voltage supply range for SN74LVT240ADBR is typically between 2.7V and 3.6V.
Q: What is the maximum output current of SN74LVT240ADBR?
A: The maximum output current of SN74LVT240ADBR is around 32mA.
Q: Can SN74LVT240ADBR be used for bidirectional communication?
A: Yes, SN74LVT240ADBR supports bidirectional communication by using its input/output pins.
Q: How many channels does SN74LVT240ADBR have?
A: SN74LVT240ADBR has 8 channels, meaning it can handle 8 separate signals.
Q: What is the propagation delay of SN74LVT240ADBR?
A: The propagation delay of SN74LVT240ADBR is typically around 3.8ns.
Q: Can SN74LVT240ADBR tolerate overvoltage on its inputs?
A: No, SN74LVT240ADBR is not designed to tolerate overvoltage on its inputs. It is recommended to use external protection measures if there is a risk of overvoltage.
Q: Is SN74LVT240ADBR compatible with TTL logic levels?
A: Yes, SN74LVT240ADBR is compatible with TTL logic levels, making it suitable for interfacing between different logic families.
Q: Can SN74LVT240ADBR be used in high-speed applications?
A: Yes, SN74LVT240ADBR is designed for high-speed operation and can be used in applications where fast signal propagation is required.
Q: What is the package type of SN74LVT240ADBR?
A: SN74LVT240ADBR comes in a TSSOP (Thin Shrink Small Outline Package) package, which is a surface-mount package with a small form factor.
Please note that these answers are general and may vary depending on specific datasheet specifications or application requirements.