TDK Corporation
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
NTCG104LH104HT1
विस्तार से देखें DataSheets

NTCG104LH104HT1

Product Overview

Category

The NTCG104LH104HT1 belongs to the category of thermistors.

Use

It is commonly used for temperature sensing and control applications.

Characteristics

  • High sensitivity to temperature changes
  • Small size
  • Wide operating temperature range
  • Accurate and reliable performance

Package

The NTCG104LH104HT1 is typically available in a small, surface-mount package.

Essence

This thermistor is essential for precise temperature measurement and regulation in various electronic devices and systems.

Packaging/Quantity

It is usually supplied in reels with a specific quantity per reel, such as 1000 pieces per reel.

Specifications

  • Resistance at 25°C: 100kΩ
  • Tolerance: ±3%
  • Operating Temperature Range: -40°C to 125°C
  • Thermal Time Constant: 7 seconds (in still air)

Detailed Pin Configuration

The NTCG104LH104HT1 has two pins, typically labeled as "VCC" and "GND."

Functional Features

  • Non-linear resistance response to temperature changes
  • High sensitivity for accurate temperature measurements
  • Stable and reliable performance over a wide temperature range

Advantages

  • Precise temperature measurement
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Non-linear response requires calibration for some applications
  • Sensitive to self-heating effects in high-current applications

Working Principles

The NTCG104LH104HT1 operates based on the principle of negative temperature coefficient, where its resistance decreases as the temperature increases.

Detailed Application Field Plans

Consumer Electronics

  • Temperature monitoring in smartphones, laptops, and tablets
  • Thermal management in battery charging systems

Automotive

  • Engine temperature sensing and control
  • Climate control systems

Industrial

  • HVAC systems
  • Temperature monitoring in industrial equipment

Detailed and Complete Alternative Models

  • NTCG104LH103HT1
  • NTCG104LH105HT1
  • NTCG104LH204HT1
  • NTCG104LH474HT1

In conclusion, the NTCG104LH104HT1 thermistor offers precise temperature sensing and control capabilities, making it suitable for a wide range of applications across various industries.

[Word Count: 343]

तकनीकी समाधानों में NTCG104LH104HT1 के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is NTCG104LH104HT1?

    • NTCG104LH104HT1 is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of NTCG104LH104HT1?

    • NTCG104LH104HT1 is commonly used in temperature sensing and compensation, inrush current limiting, and temperature control circuits in various electronic devices and systems.

  3. What is the resistance-temperature characteristic of NTCG104LH104HT1?

    • NTCG104LH104HT1 has a negative temperature coefficient, meaning its resistance decreases as the temperature increases.

  4. How accurate is NTCG104LH104HT1 in temperature measurement?

    • NTCG104LH104HT1 offers high accuracy in temperature measurement due to its predictable and repeatable resistance-temperature relationship.

  5. What is the operating temperature range of NTCG104LH104HT1?

    • The operating temperature range of NTCG104LH104HT1 typically spans from -40°C to 125°C, making it suitable for a wide range of environmental conditions.

  6. Can NTCG104LH104HT1 be used for overcurrent protection?

    • Yes, NTCG104LH104HT1 can be utilized for overcurrent protection due to its property of increasing resistance when subjected to high currents, thereby limiting the current flow.

  7. How does NTCG104LH104HT1 compare to other NTC thermistors?

    • NTCG104LH104HT1 offers a balance of high sensitivity, stability, and reliability, making it a popular choice for many technical solutions.

  8. What are the key considerations when designing with NTCG104LH104HT1?

    • When designing with NTCG104LH104HT1, factors such as self-heating effects, thermal time constants, and calibration should be carefully considered to ensure accurate performance.

  9. Is NTCG104LH104HT1 suitable for automotive applications?

    • Yes, NTCG104LH104HT1 is often used in automotive applications for temperature monitoring, climate control, and battery management due to its robustness and reliability.

  10. Where can I find detailed technical specifications for NTCG104LH104HT1?

    • Detailed technical specifications for NTCG104LH104HT1 can be found in the manufacturer's datasheet, which provides information on electrical characteristics, dimensions, and application guidelines.