ON Semiconductor
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
MC74LVX4052DTR2
विस्तार से देखें DataSheets

MC74LVX4052DTR2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Multiplexer/Demultiplexer
  • Characteristics: Low-voltage, CMOS logic, 8-channel analog multiplexer/demultiplexer
  • Package: TSSOP-16
  • Essence: This IC allows for the selection of one of eight analog signals or digital inputs to be routed to a single output line.
  • Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

  • Supply Voltage: 2.0V to 5.5V
  • Input Voltage Range: Ground to VCC
  • On-state Resistance: 70Ω (typical) at VCC = 4.5V
  • Channel Leakage Current: ±1μA (maximum) at VCC = 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC74LVX4052DTR2 has a total of 16 pins arranged as follows:

``` ___________ | | 1 | | 16 |___________|

Pin 1: Channel Select Input A Pin 2: Channel Select Input B Pin 3: Channel Select Input C Pin 4: Enable Input Pin 5: Common Output Pin 6: Channel 0 Analog/Digital Input/Output Pin 7: Channel 1 Analog/Digital Input/Output Pin 8: Channel 2 Analog/Digital Input/Output Pin 9: Channel 3 Analog/Digital Input/Output Pin 10: Channel 4 Analog/Digital Input/Output Pin 11: Channel 5 Analog/Digital Input/Output Pin 12: Channel 6 Analog/Digital Input/Output Pin 13: Channel 7 Analog/Digital Input/Output Pin 14: Ground (GND) Pin 15: Supply Voltage (VCC) Pin 16: Channel Select Input D ```

Functional Features

  • Low-voltage operation allows for compatibility with a wide range of systems.
  • CMOS logic ensures low power consumption and high noise immunity.
  • 8-channel multiplexer/demultiplexer provides flexibility in signal routing.
  • Enable input allows for easy control of the device.

Advantages and Disadvantages

Advantages: - Wide supply voltage range enables use in various applications. - Low on-state resistance ensures minimal signal distortion. - Compact TSSOP-16 package saves board space.

Disadvantages: - Limited number of channels compared to higher-end multiplexers. - Not suitable for high-frequency applications due to limited bandwidth.

Working Principles

The MC74LVX4052DTR2 operates by using the channel select inputs (A, B, C, and D) to determine which analog or digital input is connected to the common output. The enable input controls the overall operation of the device. When the enable input is high, the selected channel's input is routed to the output. When the enable input is low, all channels are disconnected from the output.

Detailed Application Field Plans

The MC74LVX4052DTR2 finds applications in various fields, including:

  1. Audio and video equipment: Used for signal routing in audio/video mixers, switchers, and amplifiers.
  2. Communication systems: Enables switching between different communication channels.
  3. Test and measurement instruments: Allows for the selection of different test signals.
  4. Industrial automation: Used for signal routing in control systems and data acquisition devices.
  5. Automotive electronics: Enables switching between different sensors or actuators.

Detailed and Complete Alternative Models

  1. CD4052BE: Similar 8-channel analog multiplexer/demultiplexer with a DIP-16 package.
  2. SN74HC4052N: 8-channel CMOS analog multiplexer/demultiplexer with a DIP-16 package.
  3. ADG508FBRWZ: 8-channel precision analog multiplexer/demultiplexer with a TSSOP-16 package.

These alternative models offer similar functionality and can be considered as substitutes for the MC74LVX4052DTR2.

Word count: 498 words

तकनीकी समाधानों में MC74LVX4052DTR2 के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

Sure! Here are 10 common questions and answers related to the application of MC74LVX4052DTR2 in technical solutions:

  1. Q: What is MC74LVX4052DTR2? A: MC74LVX4052DTR2 is a multiplexer/demultiplexer IC (Integrated Circuit) that allows for the selection of one of multiple input signals to be routed to an output.

  2. Q: What is the voltage range supported by MC74LVX4052DTR2? A: MC74LVX4052DTR2 supports a voltage range from 2V to 5.5V, making it compatible with a wide range of digital systems.

  3. Q: How many channels does MC74LVX4052DTR2 have? A: MC74LVX4052DTR2 has 4 independent analog switches, allowing for the selection of one of 4 input signals.

  4. Q: Can MC74LVX4052DTR2 be used as a multiplexer and demultiplexer? A: Yes, MC74LVX4052DTR2 can function as both a multiplexer and a demultiplexer, depending on how it is configured.

  5. Q: What is the maximum frequency supported by MC74LVX4052DTR2? A: MC74LVX4052DTR2 can handle frequencies up to 100MHz, making it suitable for various high-speed applications.

  6. Q: How is MC74LVX4052DTR2 controlled? A: MC74LVX4052DTR2 is controlled using digital control signals, typically provided by a microcontroller or other digital logic circuitry.

  7. Q: Can MC74LVX4052DTR2 be used in both analog and digital applications? A: Yes, MC74LVX4052DTR2 can be used in both analog and digital applications, as it supports both analog and digital signals.

  8. Q: What is the on-resistance of the switches in MC74LVX4052DTR2? A: The on-resistance of the switches in MC74LVX4052DTR2 is typically around 100 ohms, ensuring minimal signal degradation.

  9. Q: Can MC74LVX4052DTR2 handle bidirectional signals? A: Yes, MC74LVX4052DTR2 can handle bidirectional signals, allowing for versatile signal routing.

  10. Q: What are some common applications of MC74LVX4052DTR2? A: MC74LVX4052DTR2 is commonly used in audio/video systems, communication systems, data acquisition systems, and other applications where signal routing is required.

Please note that these answers are general and may vary depending on specific use cases and requirements.